i want ro print lables for my multis. They should show the PD and the channel number of the PD it is connected to.

Unfortanaly i cant get the channel number to show up.

Im not shure but maybe that got something to do with the "single row, 1 channel" option?

best wishes

benni

I want to give 2 dim fixtures the same DMX address because i have 1 string light with a bambino 500w fresnel.

But when i want to give the bambino the same DMX address, i cant.

is it possible to make the loom colours custom and also make it possible to custom colour the individual cable lines within the loom.

thanks

is it possible to make the loom colours custom and also make it possible to custom colour the individual cable lines within the loom.

thanks

is it possible to make the loom colours custom and also make it possible to custom colour the individual cable lines within the loom.

thanks

When Auxilary used the power is not counted on the PDU

Patchprinter file in your dm

Patchprinter Version: 2.00b83

AfAfter the csv import the dmx settings are not set up.

And now i cant set the dmx address of that fixture.

Workaround: Delete fixture in patchprinter and add it manually. But then my XYZ data is not inside anymore :(

Patchprinter Version: 2.00b83

I want to let you know that the aux output on a pdu is still not showing on the bay labels.

And the ch number count is bugged when using aux outputs on the first label, because it is beginning with 0.

See screenshots below.

Patchprinter file in DM

Patchprinter version: V2.00b83

patchprinter version: 2.00b83 (28-3-2025)

Hi,

I've been using the version before the location manager moved (because it didn't work well for us)

and this file has an issue where the 2 location colors cant change or be exported onto rack/bay labels

Thanks

Steps to reproduce:

1. Open a new Patchprinter file.
2. Import the CSV and match the SmokeJet 9ch with the Magic FX SmokeJet from the ELC Fixture Library.
3. Click OK.

The fixtures are not imported.

Workaround:

Match a different fixture with the same DMX footprint.

This issue occurs not only with the SmokeJet but also with other fixtures.

1. Using the Label Wizard via File > Print Labels:
   • The "Skip Empty Labels" checkbox is disabled by default, and the feature does not work.
   • Changing the checkbox status (on or off) has no effect.
2. Using the Label Wizard via Right-Click on the PDU > Print PD/Dimmer Bay Labels for Cable Type: Han 16:
   • The "Skip Empty Labels" checkbox is enabled by default, and the feature works as intended.
   • Changing the checkbox status (on or off) also has no effect.

Steps to Reproduce:

• Method 1:
  1. Navigate to File > Print Labels.
  2. Observe that the "Skip Empty Labels" checkbox is disabled.
  3. Attempt to toggle the checkbox and verify the feature's behavior.
• Method 2:
  1. Right-click on the PDU.
  2. Select Print PD/Dimmer Bay Labels for Cable Type: Han 16.
  3. Observe that the "Skip Empty Labels" checkbox is enabled by default.
  4. Attempt to toggle the checkbox and verify the feature's behavior.

Expected Behavior:

The "Skip Empty Labels" function should work consistently, regardless of the method used to access the Label Wizard or the initial state of the checkbox.

Observed Behavior:

The behavior of the "Skip Empty Labels" checkbox is inconsistent between the two methods.

I have 2 H16 of Auxilary outputs on my PDU but they are not showing on the bay labels.

In all cases the mode (when I have a fixture from the custom library) is mode 1 in the fixture match screen (on the import screen).

v2.00b82

When this happens i did not see the edit adjustment file and new adjustment file buttons.

v2.00b82

Sometimes, it duplicates the first line, then splits the line but leaves the split string visible.

Other times, it displays the first line three times and also leaves the split string visible.

(see screenshot)

H16 8-way:

On the first label, it counts from 2 to 9 instead of 1 to 8. Then, on the second label, it corrects itself and starts with 9 as expected.

See screenshot for reference.

4o

H16 8-way:

On the first label, it counts from 2 to 9 instead of 1 to 8. Then, on the second label, it corrects itself and starts with 9 as expected.

See screenshot for reference.

4o

Sometimes, they behave like correctly, but other times they will no re-order.

https://imgur.com/a/r03bXWT

Cheers

When patching one PD into another via a 63A patch, the original PD does not display Phase correctly, I've attatched some pictures below

https://imgur.com/KJcVv28

https://imgur.com/fzBtiTf

Thanks, let me know if I'm doing something wrong as well

Until the last update, i have always when i start patchprinter some wrong racktype names in it.

for example it should be ''CEE125 Verteiler'' which i put in and when i then close and reopen the project it change it to ''CEE125 Verteiler(From project file)''

Can you reproduced that?

It happen also when i took an older file where it was ok back then.

Version is 2.00b80

best regards

Sascha

The PD/Dimmer, Dimcity and racktype info does not show up when connecting a PDU to PDU.

I connected my "Licht" PDU to the 125a 1 outlet on my "Main" PDU. but it does not show the info.

After the setup of the pxp file it all was good. but after a software restart it is not visible anymore.

v2.00b78

files in your dm